epoxy banner

FUSION® V1100

FUSION® V1100 is a fusion bonded epoxy contact surface coating for use in applications such as dry bulk solids storage, potable water, mesophilic farm digesters (within the liquid zone) and municipal sludge treatment and storage.

Fusion Bonded Epoxy

FUSION® V1100 is Permastore’s epoxy industrial contact surface finish generally for use with bulk solid storage, potable water, filter tanks and municipal sludge storage. It is a low-cost solution that delivers good protection.

However, in some applications with highly corrosive environments or where abrasive contents are present, a reduced service life and a potential requirement for increased maintenance may be required when compared to a glass contact surface finish such as ISOFUSION®.

The contact surface of every panel supplied is 100% factory tested and inspected at an exacting standard that guarantees ‘zero discontinuity/defect free’ tank panels when tested at 1100 Volts. 

Permastore FUSION® V1100 formulation complies with appropriate controls on substances, including European REACH Regulations, which allows the coating to attain the highest global standards for safety and environmental performance.

  • Application: pH range: pH 3-13
  • Type: Thermoset polymer coating
  • Thickness: 150-250 microns
  • Test regime: Zero discontinuity at 1100 Volts
  • Meets or exceeds epoxy coating requirements of AWWA D103 -19 - section 12.6
  • Internal RESICOAT® R4-ES coating is compliant with NSF/ANSI/CAN 61 and is approved to BS 6920
  • External coating exceeds Qualicoat Class 2 requirement after 3 years Florida outdoor exposure testing in accordance with AAMA 2604-5
  • External coating meets requirements after 5 years Florida outdoor exposure testing

FUSION® V1100 is a factory applied epoxy coating that gives assurance to the highest quality associated with the PERMASTORE® brand.

Applications Include:

  • Edible/Vegetable Oils
  • Dry Bulk Solids
  • Farm Digesters (Liquid Zone)
  • Storm/Fire Water
  • Potable Water
  • Filter Tanks
  • Municipal Sludge Storage (Open Topped)
  • Municipal Sludge Treatment (Open Topped)
  • Mesophilic Farm Digester (Liquid Zone)

All applications are subject to chemical concentration and temperature considerations. All specifications relate to the contact surfaces only. A detailed specification is available on request.

Approved by the UK Secretary of State under Regulation 31 for Drinking Water and Listed by the Drinking Water Inspectorate (DWI) in its list of Approved Products.

Case Studies

FUSION BONDED EPOXY

Epoxy FUSION V1100
Green Spot 6000

Model: 7055
Application: Potable Water
Capacity: 6000㎡
Location: Thailand
FUSION BONDED EPOXY

Potable Water - Soi Dao, Thailand

Model: 3415
Application: Potable Water
Capacity: 300㎡
Location: Thailand